Description
*CONTACT US FOR A SPECIAL COUPON CODE*
Lancer Systems L7AWM® GEN 2 Advanced Warfighter Magazine – .308 Winchester / 7.62x51mm NATO / 6.5 Creedmoor, 20-Round Capacity, Hardened Steel Feed Lips & Front Magazine Catch, Hybrid Polymer Body, Translucent Dark Earth (TDE) Finish – L7-G2-20-TDE / 738435624569
Product Description
Feeding heavy-recoil large-caliber cartridges like .308 Winchester and 6.5 Creedmoor in SR25/AR-10 rifles requires a magazine engineered to handle violent bolt speeds and heavy bolt lug impacts. Standard polymer AR-10 magazines can swell when fully loaded or suffer from feed lip deformation and cracking under recoil, while traditional steel magazines add unnecessary weight and lack visual round-count verification on your bench. The **Lancer Systems® L7AWM® GEN 2 .308 Win / 6.5 Creedmoor 20-Round Magazine (L7-G2-20-TDE / 738435624569)** flatlines these feed and durability limitations, pairing an impact-resistant **Translucent Dark Earth (TDE) polymer body** with **Gen 2 hardened steel feed lips and front catch wrap**.
Proudly designed, engineered, and manufactured in Quakertown, Pennsylvania by Lancer Systems, the Gen 2 L7AWM magazine sets a new benchmark for 7.62mm/.308 weapon reliability. Built with a high-strength polymer body, the Gen 2 features an upgraded, single-piece **wrap-around hardened steel feed lip assembly** that extends down to reinforce the front magazine catch tower and rear spine interface. This hybrid steel architecture prevents feed lip spreading under long-term fully loaded storage and resists violent bolt impacts under rapid semi-automatic or suppressed firing schedules. Complete with a non-tilt follower, stainless steel spring, and translucent side walls for instant visual ammunition inspections, this 20-round magazine optimizes your precision AR-10 build straight from your armorer bench.
Engineered to lock natively into standard SR25 / DPMS Pattern AR-10 lower receivers (LMT, KAC, SIG 716, Ruger SFAR, Aero M5), this factory-calibrated magazine guarantees flawless cartridge presentation directly from your workspace bench.
*Armorer Bench Notes & Real-World AR-10 Staging Guidance: The Lancer L7-G2-20-TDE magazine arrives workspace ready as a pre-assembled 20-round hybrid feeding unit. CALIBER & RECEIVER FITMENT MATRIX: This magazine is engineered natively for **.308 Winchester, 7.62x51mm NATO, 6.5 Creedmoor, and 6.5 PRC** cartridges. *Receiver Standard Checklist:* Fits standard **SR25 / DPMS Pattern / Armalite AR-10A lower receivers** (does *not* fit Armalite AR-10B pattern lowers requiring proprietary steel mags). Armorer Workbench Custom Staging Sequence: 1. Visually and physically confirm your host AR-10/SR25 rifle is completely clear of live ammunition, the magazine is removed, and the chamber is checked safe and empty. 2. Inspect the steel feed lips and non-tilt follower to ensure no transit debris or oil obstructs vertical travel. 3. Load up to 20 rounds of .308 Win, 7.62×51 NATO, or 6.5 Creedmoor ammunition into the staggered column. 4. Verify round counts and seating depth at a glance through the Translucent Dark Earth polymer body walls. 5. Insert the loaded magazine into the lower receiver until the magazine catch locks with a distinct metallic click. 6. Cycle the bolt carrier manually to verify smooth, uninhibited cartridge pickup over the barrel extension feed ramps before rolling downrange.*
Key Features
- Hardened Steel Wrap-Around Feed Lips: One-piece hardened steel top assembly is permanently molded into the polymer body, eliminating feed lip spreading or deformation under heavy recoil.
- Gen 2 Reinforced Front Magazine Catch Tower: Upgraded steel wrap extends around the front catch interface to prevent lockup wear and ensure rock-solid receiver retention.
- Translucent Dark Earth (TDE) Polymer Body: High-impact polymer body provides instant visual verification of remaining round counts, bullet type, and seating depth.
- Engineered for .308 Win & 6.5 Creedmoor: Smooth internal geometry and constant-curve column optimize cartridge feed angles for short-action precision rifle cartridges.
- Non-Tilt Follower & Stainless Steel Spring: Precision polymer non-tilt follower driven by a heavy-duty stainless steel spring maintains uniform upward tension under rapid fire.
- Aggressive Surface Texturing & Drain Ports: Features raised exterior grid texturing for secure handling with gloved hands and bottom floorplate drain holes to clear water.
Product Specifications
- Brand: Lancer Systems® (Quakertown, PA / Made in the USA)
- Model Line: L7AWM® GEN 2 (Advanced Warfighter Magazine) Series
- MPN/SKU Code: L7-G2-20-TDE (L7AWM Gen 2 20rd Translucent Dark Earth SKU)
- UPC Code Profile: 738435624569
- Caliber Action Standardization: .308 Winchester / 7.62x51mm NATO / 6.5 Creedmoor / 6.0 Creedmoor
- Magazine Capacity Floor: 20 Rounds Total Payload Capacity
- Host Rifle Fitment: Standard SR25 / DPMS Pattern / Aero M5 / KAC / LMT / SIG 716 / Ruger SFAR
- Structural Material Base: Translucent Hybrid Polymer Body with Molded Steel Feed Lips
- Feed Lip Construction: Gen 2 One-Piece Hardened Steel Hybrid Wrap-Around Feed Structure
- Floorplate Accent Finish: Matching Dark Earth Impact-Resistant Polymer Baseplate
- Internal Spring Component: Corrosion-Resistant Heavy-Duty Stainless Steel Wire Spring
- Exterior Body Finish: Translucent Dark Earth (TDE) High-Transmittance Polymer Dressing
- Full Kit Component Checklist: 1x Lancer L7AWM Gen 2 20rd Translucent Dark Earth Magazine
- Packaging Format Class: Factory Original Sealed Lancer Systems Header Poly Bag
- Product Type Category: Rifle Accessories / Large Format Hybrid Polymer Steel Magazines
- Net Component Mass: ~6.40 Ounces (~181.4 Grams Hybrid Steel/Polymer Mass)
- Global Quality Certifications: Formulated to Rigid US Professional Duty and Military Spec Metrics
- Warranty Tracking Protection: Fully Backed by Lancer Systems Factory Limited Warranty
